Connect your existing building automation system to AI-powered analytics in minutes — without touching your IT network. Find energy waste, catch faults before they become emergencies, and prove ROI to your CFO.
Building automation systems are expensive to install and even more expensive to get useful data out of. We fix that.
Your Metasys, DESIGO, or Niagara system holds years of trend data — but you can't get useful analytics out without expensive integrations or consultant fees.
Every cloud-connected building analytics solution requires opening firewall ports, setting up VPNs, and getting IT approval. That process takes months — if it happens at all.
Trane, JCI OpenBlue, Honeywell, Siemens — none publicly disclose pricing. When you get a quote, expect $5,000–$25,000+/year per building. 85% of commercial facilities never adopt analytics because of this barrier.
Three steps from your BACnet panel to live AI analytics. No IT involvement, no configuration headaches.
Plug our cellular BACnet gateway into your BACnet/IP network or RS-485 MS/TP bus. It auto-discovers every device on your BACnet network and starts collecting data.
⚡ 5 minutesThe gateway sends readings to our cloud over its own LTE cellular connection — no WiFi, no firewall changes, no IT tickets. Your building's network is never touched.
✓ Zero IT involvementOur AI analyzes 72+ hours of trend data and surfaces energy savings opportunities, active equipment faults, and recommended setpoint changes — with dollar estimates.
💰 Pays for itselfYour facilities team sees live BACnet point values, active fault alerts with descriptions, and AI-generated recommendations ranked by dollar value — not vague suggestions.
Simultaneous heat/cool, stuck dampers, economizer failures, chiller delta-T, sensor faults, and more — running every 15 minutes.
Supply air reset, chiller setpoint optimization, demand peak shifting, after-hours setback — each with estimated annual savings in dollars.
Click any BACnet point to see its 1h/6h/24h/3-day history. Identify patterns that diagnostics alone can't catch.
The big vendors charge you a premium for complexity you don't need.
| Feature | HVAC IQ Analytics | Trane Advisor / JCI OpenBlue | Your BAS Software |
|---|---|---|---|
| Works with any BACnet system | ✓ Yes | ⚡ Own brand only | ⚡ Same brand only |
| No IT department needed | ✓ LTE cellular | ✗ VPN/firewall required | ✗ IT setup required |
| AI fault detection | ✓ 8 rules, every 15 min | ✓ Yes (expensive add-on) | ✗ Basic alarms only |
| Dollar-value savings estimates | ✓ Every recommendation | ⚡ Generic reports | ✗ No |
| Setup time | ✓ 5 minutes | ✗ Weeks / months | ✗ Already installed |
| Price per building / month | ✓ From $149 | ✗ $500–$2,000+ | ✗ $0 (but useless) |
No per-point pricing. No seat licenses. Just one flat rate per building that pays for itself in energy savings.
Most buildings find their first savings opportunity within 72 hours of connecting. Start your free trial — no credit card required.